Home / Guides

How to use Android Multi Tool: setup and first operation

Updated 2026-11-04 · Русская версия

Android Multi Tool is a credit-based servicing utility, and using it well is mostly about preparing the computer, the driver and the mode before you spend a single credit. Get those right and operations run smoothly.

What the tool is for

• FRP (Google account) removal on supported models;
• factory reset and account operations;
• read info and basic diagnostics;
• server-based flows paid for with credits.

Step 1. Prepare the computer

1. Download the program only from its official source.
2. Install to a short Latin path.
3. Add the folder to antivirus and firewall exclusions.
4. Install the drivers you may need: MediaTek VCOM, Qualcomm 9008, Samsung USB.
5. Install Visual C++ and .NET if prompted.

Step 2. Top up credits

Server operations deduct credits from your account. Confirm a credit balance before you start, and keep a small buffer so an occasional retry does not stop the job halfway through in front of a customer.

Step 3. Connect the phone correctly

Each operation needs a specific mode. Identify the chip first, then enter the right mode: BROM or preloader for MediaTek, EDL or 9008 for Qualcomm, Download Mode for Samsung. Install that mode driver so the PC detects the device.

Step 4. Verify detection

Before the real operation, run read info. If the tool reads the model and firmware, the driver, cable and mode are correct. If it does not, fix detection first rather than launching a paid operation that will fail.

Step 5. Run the operation

1. Select the model and the operation you need.
2. Confirm the model is in the supported list.
3. Start the operation and watch the log.
4. Let it finish without unplugging the cable.
5. Verify the result on the phone.

Cable and port

Most intermittent failures come from a charge-only cable or a flaky front USB 3.0 port. Use a short, verified data cable in a rear USB 2.0 port directly on the motherboard for a stable connection during the operation.

Common problems

Legitimate use

Use Android Multi Tool only on devices you own or service with the owner present and proof of ownership. FRP protects against theft, so clearing it is appropriate only after a legitimate reset, never to bypass another account.

Record keeping

Keep a log of model, firmware, operation and result. Over time this becomes a personal reference that tells you quickly whether a model is worth attempting and which method worked, saving both credits and time on repeat devices.

Bottom line

To use Android Multi Tool well: prepare the PC and drivers, keep a credit buffer, enter the correct mode, verify detection with read info, then run the operation. Work only on devices you are authorized to service.

Planning a session

Before you start, gather the phones you intend to service, note each model and chip, and confirm each one is supported. Planning the batch means you install drivers and verify detection once, then move from phone to phone efficiently, instead of stopping to solve setup problems in the middle of paid operations.

Reading the log

The operation log is your best diagnostic. Watch it as the operation runs: a stall at the connection step points to driver, cable or mode; a stall at the server step points to credits, network or support for that model. Learning to read the log turns a vague failure into a specific, fixable cause.

After the operation

• verify the result on the phone before disconnecting;
• save the log in a folder named by model;
• note which mode and method worked;
• sign out if you were using a rented account;
• keep a running list of models you can and cannot service.

Real example

A first-time user blamed the tool when a phone would not read. The log showed it never connected. The cable was charge-only and the phone was plugged into a front USB 3.0 port. A verified data cable in a rear USB 2.0 port fixed detection immediately, and the operation then completed on the first try, showing that setup, not the tool, was the real issue.

FAQ

Related guides

• Android Multi Tool credits
• Drivers and connection modes