Home / Guides

How to use Cheetah Tool Pro: setup and first operation

Updated 2026-11-04 · Русская версия

Cheetah Tool Pro is a multi-brand servicing tool, and using it effectively starts with a prepared computer and a confirmed model, just like any other professional tool. The program is only as reliable as the driver, mode and cable behind it.

What the tool covers

• FRP (Google account) removal on supported models;
• firmware flashing and factory reset;
• repair operations where legal and supported;
• read info and diagnostics across several platforms.

Step 1. Prepare the computer

1. Download Cheetah Tool Pro only from the official source.
2. Install to a short Latin path.
3. Add the folder to antivirus and firewall exclusions.
4. Install the drivers: Qualcomm 9008, MediaTek VCOM, Samsung USB.
5. Install Visual C++ and .NET if prompted.

Step 2. Get access

For a single job, renting access for a short window is far cheaper than buying a full license you will rarely use. Install the program, sign in with the account you received, and begin as soon as access is active so the window is spent on real work.

Step 3. Connect in the right mode

Identify the chip, then enter the matching mode: BROM or preloader for MediaTek, EDL or 9008 for Qualcomm, Download Mode for Samsung. Install the mode driver so Windows detects the device on the correct port.

Step 4. Verify detection

Run read info before any paid operation. A successful read confirms the driver, cable and mode. If the phone is not detected, fix that first, because launching an operation on an undetected device only wastes time and risks an incomplete result.

Step 5. Run the operation

1. Select the model and operation.
2. Confirm the model is in the supported list.
3. Start and watch the log carefully.
4. Do not unplug until it completes.
5. Verify the outcome on the phone.

Cable and port

A verified short data cable in a rear USB 2.0 port directly on the motherboard gives the most stable link. Charge-only cables and front-panel USB 3.0 ports are the usual reason for mid-operation drops.

Common problems

Make the most of a rental

• install and configure before the window starts;
• check model support and server status in advance;
• keep a verified cable and a rear USB 2.0 port ready;
• group several jobs into the same window.

Legitimate use

Use Cheetah Tool Pro only on devices you own or service for their owner with proof of ownership. FRP, flashing and repair are for legitimate servicing after a reset or purchase, not for bypassing another account.

Where it fits

Cheetah Tool Pro is a capable all-rounder. Many shops keep it alongside a specialist such as TSM Tool Pro rental for budget MediaTek work, renting whichever covers the model at hand. Shared drivers make switching between tools painless.

Bottom line

To use Cheetah Tool Pro well: prepare the PC and drivers, confirm model support, enter the right mode, verify detection, then run the operation. Rent access for one-off jobs and work only on authorized devices.

Planning a rental window

Because a rental is time-limited, plan the window. Install and configure the tool, install drivers, and verify detection on a test phone before the clock starts on serious work. Group several jobs into one window so the setup time is spent once and the paid time is spent on operations, not on troubleshooting basic connectivity.

Reading the log and recovering

Watch the operation log closely. If an operation stops, the log usually names the step: connection, authorization, or server. Fix that specific step rather than restarting blindly. If a model repeatedly fails, re-check that it is genuinely supported and that you are in the exact mode the method expects.

A preparation checklist

• exact model code and chip identified;
• correct driver installed and the device detected;
• model present in the support list;
• server online for server-based operations;
• ownership confirmed and any data-wipe warning given.

Real example

A technician rented a short window and nearly wasted it troubleshooting drivers after the clock started. The lesson stuck: on the next rental they installed everything and verified detection on a test phone before paying, then processed four phones back to back inside one window, spending the paid time only on operations.

FAQ

Related guides

• Rental vs license
• Check model support