Redmi Note 14 and Redmi 15: Chipset, Mode and Tool

Redmi Note 14 and Redmi 15 are families with several chipsets, not one phone in different boxes. The platform decides the connection mode (BROM or EDL 9008), whether Xiaomi authorization is likely, and which official list you should search at all. Below is a table from public specifications and a practical order for choosing a tool. Still verify the exact model code before you work: regional variants sometimes differ.

Redmi Note 14 chipsets

Model (typical global version)	Platform	Mode to prepare first
Redmi Note 14 4G	MediaTek Helio G99-Ultra	MediaTek preloader / BROM
Redmi Note 14 5G	MediaTek Dimensity 7025-Ultra	MediaTek preloader / BROM
Redmi Note 14 Pro 4G	MediaTek Helio G100-Ultra	MediaTek preloader / BROM
Redmi Note 14 Pro 5G	MediaTek Dimensity 7300-Ultra	MediaTek preloader / BROM
Redmi Note 14 Pro+ 5G	Qualcomm Snapdragon 7s Gen 3	EDL 9008, often with Xiaomi authorization

Manufacturer specs: Note 14 and Note 14 Pro 5G. If the model code is not a global unit, confirm the chipset from the box, from Settings, or from the Xiaomi model page. The general method is in How to identify the phone chipset. Previous generation: Redmi Note 13: chipset and mode.

Redmi 15 chipsets

Model	Platform	Codename (guide)	Mode
Redmi 15 4G	Qualcomm Snapdragon 685	Creek, codes such as 25062RN2D…	EDL 9008, authorization often required
Redmi 15 5G	Qualcomm Snapdragon 6s Gen 3	Spring, codes such as 25057RN09…	EDL 9008, authorization often required

Official pages: Redmi 15 and Redmi 15 5G. Do not mix Redmi 15 up with Redmi Note 15 — that is a later series.

Which mode to prepare

MediaTek (most Note 14 models, except the Pro+ 5G). Install the VCOM/BROM driver and keep the key combo or a test point ready if preloader is not caught. Useful: Preloader vs BROM and MTK driver on Windows 11.
Qualcomm (Note 14 Pro+ 5G and both Redmi 15 phones). You need a stable QDLoader 9008. If Windows shows qhsusb_bulk, see qhsusb_bulk and the 9008 driver. These phones often need server-side EDL authorization: EDL authentication failed.

How to choose a tool

First separate a Mi Account from FRP: Which tool to use for Xiaomi and What changed in HyperOS FRP. Then open the official list of the specific tool and look up your model code and operation, not a row that only says “Redmi Note 14”.

UnlockTool — a wide list, a good first check: How to read the UnlockTool model list. Access: rent UnlockTool.
DFT Pro Tool — often considered for Xiaomi when the model is in the program, plus a multi-day rental: How to check DFT Pro support.
Ghost Auth Tool — credits aimed at Xiaomi/Redmi/POCO and authorization cases, if the model is listed inside the tool.

Work only on the owner’s device and do not erase data until a reset is agreed. Record the security patch first: on a fresh HyperOS build, last month’s method may already be gone.

FAQ

Do all Redmi Note 14 phones use the same chipset?

No. The 4G and 5G models, and the Pro and Pro+ versions, use different platforms: from Helio G99-Ultra and Dimensity 7025-Ultra to Dimensity 7300-Ultra and Snapdragon 7s Gen 3. Always match the exact model code.

Which chipset is in the Redmi 15?

The global Redmi 15 4G (codename Creek) uses Qualcomm Snapdragon 685. The Redmi 15 5G uses Snapdragon 6s Gen 3. They are different phones with different modes and methods.

Do the Qualcomm versions of these series always need EDL authorization?

On current Qualcomm Xiaomi phones, server-side EDL authorization is very common. If a tool reports Authentication failed, that is a separate topic, not “just swap the cable”.

Can I pick a tool using only the name “Note 14”?

No. Start with the model code and the chipset, then open the official list of the tool you plan to use. Otherwise you can easily rent a program that has no method for that platform.

Topics: Xiaomi · Drivers & modes